Sierra, Silverado 2006-2007

Driven Disc & Pressure Plate

Print

Removal & Installation



  1. Remove or disconnect the following:

    Transmission
     
    Quick disconnect from the slave cylinder
     

  2.  
  3. Install a clutch alignment tool.
  4.  
  5. Mark the flywheel and a clutch pressure plate lug for the installation alignment.
  6.  
  7. Remove the pressure plate bolts and the washers.
  8.  
  9. Secure the clutch pressure plate and the clutch driven plate to the flywheel.
  10.  
  11. Remove the clutch alignment tool.
  12.  

To install:

  1. Install the bolts and the washers securing the clutch pressure plate and the clutch driven plate to the flywheel.
  2.  
  3. Install the clutch alignment tool.
  4.  
  5. Align the marks made during removal or, if new align the lightest part of the clutch pressure plate identified by a yellow dot, to the heaviest part of the flywheel, identified by an "X". Tighten the clutch pressure plate to the flywheel bolts to 52 ft. lbs. (70 Nm) in a crisscross pattern.
  6.  
  7. Remove the clutch alignment tool.
  8.  
  9. Install the transmission.
  10.  
  11. Install the quick disconnect to the concentric slave cylinder.
  12.  

 
label.common.footer.alt.autozoneLogo