Silverado 2008

5.3L V8 VIN M Auto 1

Print

5.3L V8 VIN M Auto

Trouble Code: 1380



Misfire Detected - Rough Road Data Not Available

Possible Causes:



P1380
 
The ABS controller sends a message to the ECM indicating that a failure has occurred in the ABS module.
 
Engine misfire is detected and DTC P0300 set.
 

Trouble Code: 1381



Misfire Detected - No Communication with Brake Control Module

Possible Causes:



P1381
 
An ABS malfunction exists for more than 10 seconds, preventing the ECM from receiving rough road detection data.
 
Engine misfire is detected and DTC P0300 set.
 

Trouble Code: 2575 00



Headlamp Low Beam Control Circuit

Possible Causes:



The BCM detects a short to voltage in the headlamp low beam relay control circuit.
 

Trouble Code: B0005 00



In Park Signal Circuit

Possible Causes:



DTC will set when a malfunction is observed for more than 5 seconds.
 

Trouble Code: B0015 01



Driver Pretensioner Deployment Loop Short to Battery

Possible Causes:



B0015 01, B0016 01, B0019 01, B0020 01, B0022 01, B0023 01
 
The air bag module high and/or low circuit is shorted to voltage for 120 milliseconds.
 

Trouble Code: B0015 02



Driver Pretensioner Deployment Loop Short to Ground

Possible Causes:



B0015 02, B0016 02, B0019 02, B0020 02, B0022 02, B0023 02
 
The air bag module high and/or low circuit is shorted to ground for 120 milliseconds.
 

Trouble Code: B0015 04



Driver Pretensioner Deployment Loop Open Circuit

Possible Causes:



B0015 04, B0016 04, B0019 04, B0020 04, B0022 04, B0023 04
 
The air bag module high and/or low circuit is open for 120 milliseconds.
 

Trouble Code: B0015 0D



Driver Pretensioner Deployment Loop Resistance Above Threshold

Possible Causes:



B0015 0D, B0016 0D, B0019 0D, B0020 0D, B0022 0D, B0023 0D
 
The air bag module deployment loop resistance is greater than 3.9 ohms for 120 milliseconds.
 

Trouble Code: B0015 0E



Driver Pretensioner Deployment Loop Resistance Below Threshold

Possible Causes:



B0015 0E, B0016 0E, B0019 0E, B0020 0E, B0022 0E, B0023 0E
 
The air bag module deployment loop resistance is less than 1.1 ohms for 120 milliseconds.
 

Trouble Code: B0016 01



Left Roof Rail Initiator 1 Deployment Loop Short to Battery

Possible Causes:



B0015 01, B0016 01, B0019 01, B0020 01, B0022 01, B0023 01
 
The air bag module high and/or low circuit is shorted to voltage for 120 milliseconds.
 

Trouble Code: B0016 02



Left Roof Rail Initiator 1 Deployment Loop Short to Ground

Possible Causes:



B0015 02, B0016 02, B0019 02, B0020 02, B0022 02, B0023 02
 
The air bag module high and/or low circuit is shorted to ground for 120 milliseconds.
 

Trouble Code: B0016 04



Left Roof Rail Initiator 1 Deployment Loop Open Circuit

Possible Causes:



B0015 04, B0016 04, B0019 04, B0020 04, B0022 04, B0023 04
 
The air bag module high and/or low circuit is open for 120 milliseconds.
 

Trouble Code: B0016 0D



Left Roof Rail Initiator 1 Deployment Loop Resistance Above Threshold

Possible Causes:



B0015 0D, B0016 0D, B0019 0D, B0020 0D, B0022 0D, B0023 0D
 
The air bag module deployment loop resistance is greater than 3.9 ohms for 120 milliseconds.
 

Trouble Code: B0016 0E



Left Roof Rail Initiator 1 Deployment Loop Resistance Below Threshold

Possible Causes:



B0015 0E, B0016 0E, B0019 0E, B0020 0E, B0022 0E, B0023 0E
 
The air bag module deployment loop resistance is less than 1.1 ohms for 120 milliseconds.
 

Trouble Code: B0019 01



Passenger Frontal Deployment Loop Stage 1 Short to Battery

Possible Causes:



B0015 01, B0016 01, B0019 01, B0020 01, B0022 01, B0023 01
 
The air bag module high and/or low circuit is shorted to voltage for 120 milliseconds.
 

Trouble Code: B0019 02



Passenger Frontal Deployment Loop Stage 1 Short to Ground

Possible Causes:



B0015 02, B0016 02, B0019 02, B0020 02, B0022 02, B0023 02
 
The air bag module high and/or low circuit is shorted to ground for 120 milliseconds.
 

Trouble Code: B0019 04



Passenger Frontal Deployment Loop Stage 1 Open Circuit

Possible Causes:



B0015 04, B0016 04, B0019 04, B0020 04, B0022 04, B0023 04
 
The air bag module high and/or low circuit is open for 120 milliseconds.
 

Trouble Code: B0019 0D



Passenger Frontal Deployment Loop Stage 1 Resistance Above Threshold

Possible Causes:



B0015 0D, B0016 0D, B0019 0D, B0020 0D, B0022 0D, B0023 0D
 
The air bag module deployment loop resistance is greater than 3.9 ohms for 120 milliseconds.
 

Trouble Code: B0019 0E



Passenger Frontal Deployment Loop Stage 1 Resistance Below Threshold

Possible Causes:



B0015 0E, B0016 0E, B0019 0E, B0020 0E, B0022 0E, B0023 0E
 
The air bag module deployment loop resistance is less than 1.1 ohms for 120 milliseconds.
 

Trouble Code: B0020 01



Passenger Frontal Deployment Loop Stage 2 Short to Battery

Possible Causes:



B0015 01, B0016 01, B0019 01, B0020 01, B0022 01, B0023 01
 
The air bag module high and/or low circuit is shorted to voltage for 120 milliseconds.
 

Trouble Code: B0020 02



Passenger Frontal Deployment Loop Stage 2 Short to Ground

Possible Causes:



B0015 02, B0016 02, B0019 02, B0020 02, B0022 02, B0023 02
 
The air bag module high and/or low circuit is shorted to ground for 120 milliseconds.
 

Trouble Code: B0020 04



Passenger Frontal Deployment Loop Stage 2 Open Circuit

Possible Causes:



B0015 04, B0016 04, B0019 04, B0020 04, B0022 04, B0023 04
 
The air bag module high and/or low circuit is open for 120 milliseconds.
 

Trouble Code: B0020 0D



Passenger Frontal Deployment Loop Stage 2 Resistance Above Threshold

Possible Causes:



B0015 0D, B0016 0D, B0019 0D, B0020 0D, B0022 0D, B0023 0D
 
The air bag module deployment loop resistance is greater than 3.9 ohms for 120 milliseconds.
 

Trouble Code: B0020 0E



Passenger Frontal Deployment Loop Stage 2 Resistance Below Threshold

Possible Causes:



B0015 0E, B0016 0E, B0019 0E, B0020 0E, B0022 0E, B0023 0E
 
The air bag module deployment loop resistance is less than 1.1 ohms for 120 milliseconds.
 

Trouble Code: B0022 01



Passenger Pretensioner Deployment Loop Short to Battery

Possible Causes:



B0015 01, B0016 01, B0019 01, B0020 01, B0022 01, B0023 01
 
The air bag module high and/or low circuit is shorted to voltage for 120 milliseconds.
 

Trouble Code: B0022 02



Passenger Pretensioner Deployment Loop Short to Ground

Possible Causes:



B0015 02, B0016 02, B0019 02, B0020 02, B0022 02, B0023 02
 
The air bag module high and/or low circuit is shorted to ground for 120 milliseconds.
 

Trouble Code: B0022 04



Passenger Pretensioner Deployment Loop Open Circuit

Possible Causes:



B0015 04, B0016 04, B0019 04, B0020 04, B0022 04, B0023 04
 
The air bag module high and/or low circuit is open for 120 milliseconds.
 

Trouble Code: B0022 0D



Passenger Pretensioner Deployment Loop Resistance Above Threshold

Possible Causes:



B0015 0D, B0016 0D, B0019 0D, B0020 0D, B0022 0D, B0023 0D
 
The air bag module deployment loop resistance is greater than 3.9 ohms for 120 milliseconds.
 

Trouble Code: B0022 0E



Passenger Pretensioner Deployment Loop Resistance Below Threshold

Possible Causes:



B0015 0E, B0016 0E, B0019 0E, B0020 0E, B0022 0E, B0023 0E
 
The air bag module deployment loop resistance is less than 1.1 ohms for 120 milliseconds.
 

Trouble Code: B0023 01



Right Roof Rail Initiator 1 Deployment Loop Short to Battery

Possible Causes:



B0015 01, B0016 01, B0019 01, B0020 01, B0022 01, B0023 01
 
The air bag module high and/or low circuit is shorted to voltage for 120 milliseconds.
 

Trouble Code: B0023 02



Right Roof Rail Initiator 1 Deployment Loop Short to Ground

Possible Causes:



B0015 02, B0016 02, B0019 02, B0020 02, B0022 02, B0023 02
 
The air bag module high and/or low circuit is shorted to ground for 120 milliseconds.
 

Trouble Code: B0023 04



Right Roof Rail Initiator 1 Deployment Loop Open Circuit

Possible Causes:



B0015 04, B0016 04, B0019 04, B0020 04, B0022 04, B0023 04
 
The air bag module high and/or low circuit is open for 120 milliseconds.
 

Trouble Code: B0023 0D



Right Roof Rail Initiator 1 Deployment Loop Resistance Above Threshold

Possible Causes:



B0015 0D, B0016 0D, B0019 0D, B0020 0D, B0022 0D, B0023 0D
 
The air bag module deployment loop resistance is greater than 3.9 ohms for 120 milliseconds.
 

Trouble Code: B0023 0E



Right Roof Rail Initiator 1 Deployment Loop Resistance Below Threshold

Possible Causes:



B0015 0E, B0016 0E, B0019 0E, B0020 0E, B0022 0E, B0023 0E
 
The air bag module deployment loop resistance is less than 1.1 ohms for 120 milliseconds.
 

Trouble Code: B0052 00



Deployment Commanded

Possible Causes:



B0052
 
The SDM detects a frontal impact of sufficient force to warrant deployment of the frontal air bags.
 
The SDM detects a side impact of sufficient force to warrant deployment of a side impact air bag and/or roof rail air bag.
 
The SDM has deployed the seat belt buckle pretensioner for 3 separate deployments.
 

Trouble Code: B0071 04



Passenger Seat Belt Tension Sensor Circuit Open

Possible Causes:



The PPS module detects the voltage at the passenger seat belt tension sensor signal circuit is less than 0.5 volt or greater than 4.5 volts for 1 second.
 
The PPS module detects the voltage at the passenger seat belt tension sensor voltage reference circuit is less than 4.5 volts or greater than 9.1 volts for 1 second.
 
The PPS module detects the amperage at the passenger seat belt tension sensor low reference circuit is 25 MA or greater for 1 second.
 

Trouble Code: B0074 03



Passenger Presence Sensor Circuit Voltage Below Threshold

Possible Causes:



The passenger presence module detects the voltage at the passenger presence sensor signal is less than 0.5 volt or greater than 4.5 volts for 500 milliseconds.
 
The passenger presence module detects the voltage at the passenger presence sensor 5 volt reference is less than 4.5 volts or greater than 9.1 volts for 500 milliseconds.
 
The passenger presence module detects the amperage at the passenger presence sensor low reference is 25 mA or greater for 500 milliseconds.
 

Trouble Code: B0074 07



Passenger Presence Sensor Circuit Voltage Above Threshold

Possible Causes:



The passenger presence module detects the voltage at the passenger presence sensor signal is less than 0.5 volt or greater than 4.5 volts for 500 milliseconds.
 
The passenger presence module detects the voltage at the passenger presence sensor 5 volt reference is less than 4.5 volts or greater than 9.1 volts for 500 milliseconds.
 
The passenger presence module detects the amperage at the passenger presence sensor low reference is 25 mA or greater for 500 milliseconds.
 

Trouble Code: B0074 08



Passenger Presence Sensor Circuit Signal Invalid

Possible Causes:



The passenger presence module detects the voltage at the passenger presence sensor signal is less than 0.5 volt or greater than 4.5 volts for 500 milliseconds.
 
The passenger presence module detects the voltage at the passenger presence sensor 5 volt reference is less than 4.5 volts or greater than 9.1 volts for 500 milliseconds.
 
The passenger presence module detects the amperage at the passenger presence sensor low reference is 25 mA or greater for 500 milliseconds.
 

Trouble Code: B0081 0F



Passenger Presence Module Erratic

Possible Causes:



B0081 0F
 
The SDM has received a fault present message from the passenger presence module.
 

 
label.common.footer.alt.autozoneLogo