Silverado 2008

Stabilizer Shaft

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle safely.
  4.  
  5. Remove the right rear shock absorber.

    Click image to see an enlarged view

    Fig. Rear shock absorber and related components-1500



    Click image to see an enlarged view

    Fig. Rear shock absorber and related components-2500 and 3500



    Click image to see an enlarged view

    Fig. Stabilizer shaft insulator and related components-3500



    Click image to see an enlarged view

    Fig. Stabilizer shaft link and related components-3500

  6.  
  7. Remove the stabilizer shaft insulators.
  8.  
  9. Remove the lower stabilizer link nuts.
  10.  
  11. Remove the driveshaft.
  12.  
  13. Remove the component from its mounting.

    Click image to see an enlarged view

    Fig. Stabilizer shaft and related components-3500

  14.  

To install:


NOTE
Be sure to use new fasteners, as required.

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo