Silverado 2008

Learning The Restraints ID Procedure

Print

Specific to:

Chevrolet Silverado 1500 2008


NOTE
Using the GM diagnostic scan tool, or equivalent, refer to the on-screen reprogramming directions and perform the learning the restraints ID procedure.


NOTE
Navigate on the scan tool to Vehicle Control Systems, Module Setup, Body Control Module, Setup SDM Primary Key in BCM, then follow the instructions on the tool.

  1. Turn the ignition OFF for ten seconds.
  2.  
  3. Connect the scan tool to the data link connector.
  4.  
  5. Turn the ignition ON, with the engine OFF.
  6.  
  7. Use the scan tool in order to retrieve history DTC-s from all modules.
  8.  
  9. Clear the history DTC-s.
  10.  

 
label.common.footer.alt.autozoneLogo