Solstice 2006-2008, Sky 2007-2008

Removal & Installation

Print

Left Side



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the fuse labeled HVAC CTRL (BATT).
  4.  
  5. Remove the knee bolster.
  6.  
  7. Disconnect the electrical connector.
  8.  
  9. Remove the left air temperature actuator (Blend Door) screws.
  10.  
  11. Remove the left air temperature actuator.

    Click image to see an enlarged view

    Fig. Left air temperature actuator (Pontiac Solstice shown; Saturn Sky similar)

  12.  

To install:

  1. Install the left air temperature actuator.
  2.  
  3. Install the left air temperature actuator screws and tighten to 13 inch. lbs. (1.5 Nm).
  4.  
  5. Reconnect the electrical connector.
  6.  
  7. Install the knee bolster.
  8.  
  9. Reconnect the fuse labeled HVAC CTRL (BATT).
  10.  
  11. Recalibrate the Actuator.
  12.  

Right Side



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the fuse labeled HVAC CTRL (BATT).
  4.  
  5. Remove the knee bolster.
  6.  
  7. Disconnect the electrical connector.
  8.  
  9. Remove the right air temperature actuator (Blend Door) screws.
  10.  
  11. Remove the right air temperature actuator.

    Click image to see an enlarged view

    Fig. Right air temperature actuator (Pontiac Solstice shown: Saturn Sky similar)

  12.  

To install:

  1. Install the right air temperature actuator.
  2.  
  3. Install the right air temperature actuator screws and tighten to 13 inch. lbs. (1.5 Nm).
  4.  
  5. Reconnect the electrical connector.
  6.  
  7. Install the knee bolster.
  8.  
  9. Reconnect the fuse labeled HVAC CTRL (BATT).
  10.  
  11. Recalibrate the Actuator.
  12.  

 
label.common.footer.alt.autozoneLogo