Solstice 2006-2008, Sky 2007-2008

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the instrument panel (I/P) compartment.
  4.  
  5. Disconnect the blower motor resistor electrical connector.
  6.  
  7. Remove blower motor resistor screws.
  8.  
  9. Remove blower motor resistor.
  10.  
  11. Remove blower motor screws.
  12.  
  13. Remove blower motor assembly.

    Click image to see an enlarged view

    Fig. Blower motor assembly and resistor

  14.  

To install:

  1. Install blower motor assembly.
  2.  
  3. Install blower motor screws and tighten to 13 inch. lbs. (1.5 Nm).
  4.  
  5. Install blower motor resistor.
  6.  
  7. Install blower motor resistor screws and tighten to 13 inch. lbs. (1.5 Nm).
  8.  
  9. Reconnect the blower motor resistor electrical connector.
  10.  
  11. Install the instrument panel (I/P) compartment.
  12.  

 
label.common.footer.alt.autozoneLogo