Solstice 2006-2008, Sky 2007-2008

Power Brake Booster Vacuum Sensor

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Turn the ignition switch to the OFF position.
  4.  
  5. Apply the brake pedal several times until the brake pedal becomes firm to deplete the power brake booster vacuum reserve.
  6.  
  7. Disconnect the power brake booster vacuum sensor electrical connector.
  8.  
  9. Disconnect the power brake booster vacuum hose.
  10.  
  11. Remove the power brake booster vacuum sensor.
    NOTE
    If necessary, a small amount of denatured alcohol can be used as an assembly aid for installing the vacuum hose to the power brake booster vacuum sensor. Do not use soap.



    Click image to see an enlarged view

    Fig. Power brake booster vacuum sensor

  12.  
  13. Install the power brake booster vacuum sensor.
  14.  
  15. Reconnect the power brake booster vacuum hose.
  16.  
  17. Reconnect the power brake booster vacuum sensor electrical connector.
  18.  

 
label.common.footer.alt.autozoneLogo