Solstice 2006-2008, Sky 2007-2008

2.0L L4 VIN X Std 12

Print

Trouble Code: U0020



Low Speed CAN Communication Bus Performance

Trouble Code: U0020



Low Speed CAN Communication Bus Performance

Possible Causes:



Control modules the vehicle is equipped with
 
Control modules B+, ignition, ground, communication enable and serial data circuit terminals
 
Control module locations on the low and high speed GMLAN serial data circuits
 

Trouble Code: U0073



Controller Area Network (CAN) Bus Communication

Possible Causes:



This DTC cannot be retrieved with a current status. Diagnosis of a current DTC is accomplished via Scan Tool Does Not Communicate with High Speed GMLAN Device . Refer to Data Link References for the correct procedure for the specific module(s) and the busses they use to communicate.
 

Trouble Code: U0073



Control Module Communication Bus Off

Possible Causes:



Control modules the vehicle is equipped with
 
Control module locations on the low speed GMLAN serial data circuit
 
Each control module's low speed GMLAN serial data circuit terminals
 
Control modules the vehicle is equipped with
 
High speed GMLAN serial data circuit terminating resistors
 
Control module locations on the high speed GMLAN serial data circuits
 
Each control module's high speed GMLAN serial data circuit terminals
 

Trouble Code: U0100



Lost Communication With Engine/Powertrain Control Module (ECM/PCM)

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U0101



Lost Communication With Transmission Control Module (TCM)

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U0121



Lost Communication With Electronic Brake Control Module (EBCM)

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U0140



Lost Communication With Body Control Module (BCM)

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U0198



Lost Communication With Communication Interface Module (OnStar®)

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U0299



N/A

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U1000



Class 2 Communication Malfunction

Possible Causes:



Class 2 circuit is open, shorted to ground or shorted to power
 
ECM ignition power circuit(s) has a high resistance condition
 
ECM main ground circuit(s) has a high resistance condition
 
SDM (module) could be shorted pulling the voltage low
 

Trouble Code: U1016



No Communication With Powertrain Control Module

Possible Causes:



ECM Class 2 circuit is open, shorted to ground or to B+
 
ECM ignition power circuit(s) has a high resistance condition
 
ECM main ground circuit(s) has a high resistance condition
 
ECM (module) may have failed and is pulling the circuit low
 

Trouble Code: U1026



Loss of ATC Class 2 Communication

Possible Causes:



Check for a loose connection at the ATC module
 
Test the main power and ground circuits to the ATC module
 
Check the Class 2 serial data circuit to the ATC module
 
ATC module may have failed
 

Trouble Code: U1041



Loss of Electronic Brake Controller Communication

Possible Causes:



Check for a loose connection at the EBCM (module)
 
Test the main power and ground circuits to the EBCM (module)
 
Check the Class 2 serial data circuit to the EBCM (module)
 
EBCM (module) may have failed
 

Trouble Code: U1064



No Communication With Body Control Module

Possible Causes:



BCM Class 2 circuit is open, shorted to ground or to B+
 
BCM ignition power circuit has a high resistance condition
 
BCM main ground circuit(s) has a high resistance condition
 
BCM (module) may have failed and is pulling the circuit low
 

Trouble Code: U1088



No Communication With SDM (Restraint Module)

Possible Causes:



SDM Class 2 circuit is open, shorted to ground or to B+
 
SDM ignition power circuit has a high resistance condition
 
SDM main ground circuit(s) has a high resistance condition
 
SDM (module) may have failed and is pulling the circuit low
 

Trouble Code: U1092



Loss of VTD (Pass Lock) Communication

Possible Causes:



Check for a loose connection at the VTD module
 
Test the main power and ground circuits to the VTD module
 
Check the Class 2 serial data circuit to the VTD module
 
VTD module may have failed
 

Trouble Code: U1096



No Communication With Instrument Panel Cluster

Possible Causes:



IPC Class 2 circuit is open, shorted to ground or to B+
 
IPC ignition power circuit has a high resistance condition
 
IPC main ground circuit(s) has a high resistance condition
 
IPC (module) may have failed and is pulling the circuit low
 

Trouble Code: U1097



No Communication With Driver Information Center

Possible Causes:



DIC Class 2 circuit is open, shorted to ground or to B+
 
DIC ignition power circuit has a high resistance condition
 
DIC main ground circuit(s) has a high resistance condition
 
DIC (module) may have failed and is pulling the circuit low
 

Trouble Code: U1151



No Communication With Vehicle Interface Unit

Possible Causes:



VIU Class 2 circuit is open, shorted to ground or to B+
 
VIU ignition power circuit has a high resistance condition
 
VIU main ground circuit(s) has a high resistance condition
 
VIU (module) may have failed and is pulling the circuit low
 

Trouble Code: U1152



No Communication With HVAC Control Module

Possible Causes:



HVAC Class 2 circuit is open, shorted to ground or to B+
 
HVAC ignition power circuit has a high resistance condition
 
HVAC main ground circuit(s) has a high resistance condition
 
HVAC (module) may have failed and is pulling the circuit low
 

Trouble Code: U1193



Loss of Vehicle Immobilizer Module Communications

Possible Causes:



Test the main power and ground circuits to the VIM module for a loose connection
 
Check the Class 2 serial data circuit to the VIM module
 
VTD module may have failed
 

Trouble Code: U1255



Class 2 Communications Malfunction

Possible Causes:



Class 2 circuit is open, shorted to ground or shorted to power
 
ECM ignition power circuit(s) has a high resistance condition
 
ECM main ground circuit(s) has a high resistance condition
 

Trouble Code: U1300



Class 2 Circuit Short to Ground

Possible Causes:



Class 2 serial data line was in a low state for 3 seconds due to a short to sensor ground or chassis ground
 
One or more modules on the Class 2 line has a short to ground
 

Trouble Code: U1301



Class 2 Circuit Short to Battery

Possible Causes:



Class 2 serial data line was in a high state for 3 seconds due to a short to VREF or system power
 
One or more modules on Class 2 line has an short to power
 

Trouble Code: U1305



Class 2 Data Link High or Low

Possible Causes:



Class 2 serial data line has either a high or low voltage condition on the circuit, and the module cannot identify the fault
 
One or more modules on Class 2 line has an short to power
 
One or more modules on the Class 2 line has a short to ground
 

Trouble Code: U2100



Controller Area Network (CAN) Bus Communication

Possible Causes:



This DTC cannot be retrieved with a current status. Diagnosis of a current DTC is accomplished via Scan Tool Does Not Communicate with High Speed GMLAN Device . Refer to Data Link References for the correct procedure for the specific module(s) and the busses they use to communicate.
 

Trouble Code: U2103



Fewer Controllers On Than Programmed

Trouble Code: U2105



Lost Communication With Engine Control Module (ECM)

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U2106



Lost Communication With Transmission Control Module (TCM)

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U2107



Lost Communication With Body Control Module (BCM)

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U2108



Lost Communication With Electronic Brake Control Module (EBCM)

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U2113



Lost Communication With Sensing Diagnostic Module (SDM)

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U2122



Lost Communication With Radio

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U2125



Lost Communication With Mobile Communications Control Systems

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U2129



Lost Communications With Remote Function Actuator (RFA)

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U2137



Lost Communication With Vehicle Theft Deterrent (VTD)

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U2172



Lost Communication With Digital Radio Receiver

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

Trouble Code: U2199



Unassigned

Possible Causes:



Diagnose any power moding DTCs prior to diagnosing data communication DTCs.
 

 
label.common.footer.alt.autozoneLogo