Solstice 2006-2008, Sky 2007-2008

2.0L L4 VIN X Std 6

Print

Trouble Code: P0458



Evaporative Emission (EVAP) Purge Solenoid Control Circuit Low Voltage

Trouble Code: P0458



Evaporative Emission (EVAP) Purge Solenoid Control Circuit High Voltage

Possible Causes:



EVAP purge solenoid control circuit for a shorted to ground.
 
EVAP purge solenoid shorted to voltage or an open/high resistance
 
Faulty EVAP purge solenoid.
 
ECM has failed
 

Trouble Code: P0459



Evaporative Emission (EVAP) Purge Solenoid Control Circuit High Voltage

Trouble Code: P0459



Fuel Level Sensor High Input

Possible Causes:



Fuel level sensor signal circuit is shorted to system power
 
Fuel level sensor ground circuit is open
 
Fuel level sender is damaged, binding or not aligned properly
 
ECM has failed
 

Trouble Code: P0461



Fuel Level Sensor Circuit Performance

Trouble Code: P0462



Fuel Level Sensor Circuit Low Voltage

Trouble Code: P0463



Fuel Level Sensor Circuit High Voltage

Trouble Code: P0464



Fuel Level Sensor 1 Circuit Intermittent

Trouble Code: P0480



Cooling Fan Speed Output Circuit

Trouble Code: P0496



Evaporative Emission System Flow During Non-Purge

Trouble Code: P0497



Evaporative Emission System Low Purge Flow

Trouble Code: P0498



Evaporative Emission (EVAP) Vent Solenoid Control Circuit Low Voltage

Trouble Code: P0499



Evaporative Emission (EVAP) Vent Solenoid Control Circuit High Voltage

Trouble Code: P0501



Vehicle Speed Sensor (VSS) Performance

Trouble Code: P0502



Vehicle Speed Sensor (VSS) Circuit Low Voltage

Trouble Code: P0503



Vehicle Speed Sensor (VSS) Circuit Intermittent

Trouble Code: P0506



Idle Speed Low

Trouble Code: P0507



Idle Speed High

Trouble Code: P050A



Cold Start Idle Air Control System Performance

Trouble Code: P050A



Cold Start Idle Air Control (IAC) System Performance

Possible Causes:



Air inlet duct is collapsed, loose or air filter element is clogged
 
A parasitic load on the engine
 
Base engine problem (i.e., compression or misfire condition)
 
MAF sensor is dirty, out-of-calibration or it is "skewed"
 
Throttle plate, throttle shaft or linkage is damaged or sticking
 
ECM has failed
 

Trouble Code: P0520



Engine Oil Pressure (EOP) Sensor Circuit

Trouble Code: P0532



Air Conditioning (A/C) Refrigerant Pressure Sensor Circuit

Trouble Code: P0533



Air Conditioning (A/C) Refrigerant Pressure Sensor Circuit Low Voltage

Trouble Code: P0560



System Voltage

Possible Causes:



Some possible causes of this DTC are overcharging with a battery charger and jump starting.
 
A high or low voltage DTC in multiple modules indicates a concern in the charging system.
 

Trouble Code: P0562



System Voltage Low

Possible Causes:



A low voltage DTC in multiple modules indicates a concern in the charging system.
 

Trouble Code: P0563



System Voltage High

Possible Causes:



Observe the driver information center (DIC) messaging that would indicate the electrical system requires service.
 
Inspect for loose or damaged terminals at the generator.
 
Inspect for loose or worn generator drive belt.
 
Use the scan tool in order to inspect all other modules for voltage related DTCs.
 
Running the engine with a battery charger attached may cause DTC P0563 to set.
 
Inspect the charging circuit for high resistance.
 
Inspect the vehicle battery for open or sulfated cells.
 

Trouble Code: P0571



Cruise Control Brake Switch Circuit

Trouble Code: P0572



Brake Switch Circuit 1 Low Voltage

Trouble Code: P0573



Brake Switch Circuit 1 High Voltage

Trouble Code: P0575



Cruise Control Switch Signal Circuit

Possible Causes:



Using the Failure Records data may help locate an intermittent condition. If you cannot duplicate the DTC, the information in the Failure Records can help determine how many miles since the DTC set. The Fail Counter and Pass Counter can help determine how many ignition cycles that the diagnostic test reported a pass and/or a fail.
 

Trouble Code: P0601



Transmission Control Module (TCM) Read Only Memory (ROM)

Possible Causes:



DTC P0602 indicates the TCM is not programmed.
 

Trouble Code: P0601



Control Module Torque Performance

Possible Causes:



Voltage and ground inputs to the ECM
 
High resistance, short or open condition to the ECM
 
ECM is not properly programmed
 
ECM has failed
 

Trouble Code: P0601A



Control Module Torque Calculation Performance

Possible Causes:



Voltage and ground inputs to the ECM
 
High resistance, short or open condition to the ECM
 
ECM is not properly programmed
 
ECM has failed
 

Trouble Code: P0601B



Control Module Engine Speed Performance

Possible Causes:



Voltage and ground inputs to the ECM
 
High resistance, short or open condition to the ECM
 
ECM is not properly programmed
 
ECM has failed
 

Trouble Code: P0601C



Control Module Not Programmed

Possible Causes:



Check the voltage and ground inputs to the ECM for a, short, open or high resistance
 
ECM has failed
 

Trouble Code: P0602



Transmission Control Module (TCM) Not Programmed

Possible Causes:



DTC P0602 indicates the TCM is not programmed.
 

Trouble Code: P0602



Control Module Long Term Memory Reset

Possible Causes:



Check the voltage and ground inputs to the ECM for a, short, open or high resistance
 
ECM has failed
 

Trouble Code: P0603



Transmission Control Module (TCM) Long Term Memory Reset

Possible Causes:



DTC P0602 indicates the TCM is not programmed.
 

Trouble Code: P0603



Control Module Random Access Memory (RAM)

Possible Causes:



Check the voltage and ground inputs to the ECM for a, short, open or high resistance
 
ECM has failed
 

Trouble Code: P0604



Transmission Control Module (TCM) Random Access Memory (RAM)

Possible Causes:



DTC P0602 indicates the TCM is not programmed.
 

 
label.common.footer.alt.autozoneLogo