Solstice 2006-2008, Sky 2007-2008

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the fuse labeled HVAC CTRL (BATT).
  4.  
  5. Remove the Instrument Panel (I/P) tie bar.
  6.  
  7. Disconnect the electrical connector.
  8.  
  9. Remove the mode door actuator screws.
  10.  
  11. Remove the mode door actuator.

    Click image to see an enlarged view

    Fig. Mode door actuator (Pontiac Solstice shown; Saturn Sky similar)

  12.  

To install:

  1. Install the mode door actuator.
  2.  
  3. Install the mode door actuator screws and tighten to 13 inch. lbs. (1.5 Nm).
  4.  
  5. Reconnect the electrical connector.
  6.  
  7. Install the Instrument Panel (I/P) tie bar.
  8.  
  9. Reconnect the fuse labeled HVAC CTRL (BATT).
  10.  
  11. Recalibrate the Actuator.
  12.  

 
label.common.footer.alt.autozoneLogo