Sprinter 2005-2007

Ignition Coil

Print

Removal & Installation



3.5L Engine
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the engine appearance cover.
  4.  
  5. Remove the air intake assembly.
  6.  
  7. Disconnect the ignition coil wiring harness.
  8.  
  9. Remove the two ignition coil mounting bolts and remove the ignition coil.

    Click image to see an enlarged view

    Fig. Disconnect the wiring harness (1) and remove the mounting bolts (3) to remove the ignition coil (2)-3.5L Engine

  10.  

To install:

  1. Install the ignition coil and tighten the mounting bolts to 80 inch lbs. (9 Nm).
  2.  
  3. Connect the ignition coil wiring harness.
  4.  
  5. Install the air intake assembly.
  6.  
  7. Install the engine appearance cover.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo