Sprinter 2005-2007

Oil Pressure Sensor

Print

Removal & Installation



  1. Open hood and disconnect negative battery cable.
  2.  
  3. Disconnect engine oil pressure sensor connector.
  4.  
  5. Remove engine oil pressure sensor from the engine.
  6.  

To install:

  1. Install the engine oil pressure sensor to the engine. Torque sensor to 11 ft.. lbs. (15 N·m).
  2.  
  3. Connect engine oil pressure sensor electrical connector to the sensor.
  4.  
  5. Add engine oil and check engine oil level as needed.
  6.  
  7. Connect the negative battery cable.
  8.  
  9. Start vehicle and inspect for leaks.
  10.  

 
label.common.footer.alt.autozoneLogo