Sprinter 2005-2007

Stabilizer Bar (Sway Bar) & Links

Print

Removal & Installation



  1. Raise and safely support the vehicle.
  2.  
  3. Remove the stabilizer bar clamp bolts on the front axle.
  4.  
  5. Press the rubber mount outwards out of the brackets.
  6.  
  7. Remove the stabilizer bar links from the stabilizer bar.
  8.  

To install:

  1. Install the stabilizer links to the stabilizer bar.
  2.  
  3. Install the stabilizer bar to the front axle.
  4.  
  5. Install the stabilizer bar clamps and tighten the bolts to 22 ft. lbs. (30 Nm).
  6.  
  7. Lower the vehicle.
  8.  

  1. Raise and safely support the vehicle.
  2.  
  3. Remove the front transverse spring. For additional information, refer to the following section, "Leaf Spring, Removal & Installation.-
  4.  
  5. Remove the stabilizer bar links at the stabilizer bar.
  6.  
  7. Remove the stabilizer bar retainer clamp bolts.
  8.  
  9. Lower the stabilizer bar downwards.
  10.  
  11. Remove the bushings from the bar.
  12.  
  13. Remove the stabilizer bar from the vehicle.
  14.  

To install:

  1. Install the stabilizer bar and install the bushings to the bar.
  2.  
  3. Install the bar clamp and tighten the bolts to 43 ft. lbs. (55 Nm).
  4.  
  5. Install the links to the stabilizer bar and tighten the bolts to 78 ft. lbs. (106 Nm).
  6.  
  7. Install the front transverse spring.
  8.  
  9. Lower the vehicle.
  10.  
  11. Check and adjust the alignment as possible.
  12.  

 
label.common.footer.alt.autozoneLogo