Sprinter 2005-2007

Throttle Body

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the engine appearance cover.
  4.  
  5. Remove the air intake assembly.
  6.  
  7. Remove the Mass Air Flow (MAF) sensor.
  8.  
  9. Disconnect the electronic throttle control wiring harness.
  10.  
  11. Remove the throttle body mounting bolts and remove the throttle body.
  12.  

To install:

  1. Install the throttle body assembly and tighten the mounting bolts to 80 inch lbs. (9 Nm).
  2.  
  3. Connect the electronic throttle control wiring harness.
  4.  
  5. Install the MAF sensor.
  6.  
  7. Install the air intake assembly.
  8.  
  9. Install the engine appearance cover.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo