Sprinter 2005-2007

Locks & Lock Systems

Print

Power Door Locks



Removal & Installation
Door Lock Motor
  1. Disconnect and isolate the battery negative cable.
  2.  
  3. Remove the door trim panel.
  4.  
  5. Remove the door lock.
  6.  
  7. Remove the door lock motor from the door lock.
  8.  

To install:

  1. Install the door lock motor to the door lock.
  2.  
  3. Install the door lock.
  4.  
  5. Install the door trim panel.
  6.  
  7. Connect the battery negative cable.
  8.  

Front
  1. Install the door lock motor and connect the electrical connectors.
  2.  
  3. Install the lock cylinder.
  4.  
  5. Install the watershield.
  6.  
  7. Install the speaker.
  8.  
  9. Install the door module.
  10.  
  11. Install the RKE Antenna.
  12.  
  13. Install the door trim panel.
  14.  
  15. Connect the battery negative cable.
  16.  

Rear
Rear Door Lock Motor
  1. Disconnect and isolate the battery negative cable.
  2.  
  3. Remove the rear door trim panel.
  4.  
  5. Remove the lock motor fasteners.
  6.  
  7. Disconnect the electrical connectors and mechanical attachments.
  8.  
  9. Remove the door lock motor.
  10.  

To install:

  1. Install the door lock motor.
  2.  
  3. Connect the electrical connectors and mechanical connections.
  4.  
  5. Install the door lock motor fasteners.
  6.  
  7. Install the rear door trim panel.
  8.  
  9. Connect the battery negative cable.
  10.  

Door Lock Switch
  1. Disconnect and isolate the battery negative cable.
  2.  
  3. Remove the instrument panel center bezel.
  4.  
  5. Remove the central locking switch from the bezel.
  6.  

To install:

  1. Install switch to bezel.
  2.  
  3. Install instrument panel center bezel.
  4.  
  5. Connect battery negative cable.
  6.  

  1. Disconnect and isolate the battery negative cable.
  2.  
  3. Remove the instrument panel center bezel.
  4.  
  5. Disconnect the electrical connectors.
  6.  
  7. Remove the central locking switch from the bezel.
  8.  

To install:

  1. Install switch to bezel.
  2.  
  3. Connect the electrical connectors
  4.  
  5. Install instrument panel center bezel.
  6.  
  7. Connect the battery negative cable.
  8.  

 
label.common.footer.alt.autozoneLogo