Sprinter 2005-2007

Window Systems

Print

Power Window System



Removal & Installation
Switch
  1. Disconnect and isolate the battery negative cable.
  2.  
  3. Remove door handle cover.
  4.  
  5. Remove power window switch trim from door trim panel.
  6.  
  7. Disconnect wire harness connectors from switches.
  8.  
  9. Remove power window switch from trim.
  10.  

To install:

  1. Install switch to trim.
  2.  
  3. Connect wire harness connectors to switches.
  4.  
  5. Install power window switch trim to door trim panel.
  6.  
  7. Install door handle cover.
  8.  
  9. Connect battery negative cable.
  10.  

Window Motor & Regulator
  1. Disconnect and isolate the battery negative cable.
  2.  
  3. Remove the door trim panel.
  4.  
  5. Remove the watershield.
  6.  
  7. Disconnect the electrical connector.
  8.  
  9. Remove the mounting fasteners.
  10.  
  11. Remove the power window motor.
  12.  

To install:

  1. Install the power window motor.
  2.  
  3. Install the mounting fasteners.
  4.  
  5. Connect the electrical connector.
  6.  
  7. Install the watershield.
  8.  
  9. Install the door trim panel.
  10.  
  11. Connect the battery negative cable.
  12.  

 
label.common.footer.alt.autozoneLogo