Subaru Car 1998-05

Vehicle Dynamic Control Module

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the lower instrument panel cover. Disconnect the connectors on the back side of the cover.
  4.  
  5. Remove the three bolts which secure the fuse box to the body. Move the fuse box aside.
  6.  
  7. Remove the two mounting bolts that hold the VDC control module onto the bracket.
  8.  
  9. Disconnect the wiring harness and remove the VDC control module.
  10.  
  11. Installation is the reverse order of removal.
  12.  

 
label.common.footer.alt.autozoneLogo