Subaru Coupes/Sedans/Wagons 1985-1996 Repair Guide

Muffler Assembly

Print

REMOVAL & INSTALLATION



  1. Remove the bolts and self locking nuts which hold the rear exhaust pipe to the muffler assembly.
  2.  
  3. Remove the left and right rubber cushions from the muffler assembly and detach the muffler assembly.
  4.  

To install:
  1. Attach the muffler section, and secure in place new safe locking nuts.
  2.  

ADJUSTMENTS



  1. After installing exhaust system parts, check to make sure clearances between parts and car body are sufficient enough to prevent contact.
  2.  
  3. If any clearance is not, loosen all connections.
  4.  
  5. Adjust when necessary to obtain proper clearances.
  6.  
  7. Tighten all connections securely.
  8.  

 
label.common.footer.alt.autozoneLogo