The mirrors are controlled by a single switch assembly, located on the instrument panel or the door panel. The motors that operate the mirrors are part of the mirror assembly and cannot be replaced separately.
The mirror switch consists of a left-right change over select knob and control knobs. The switch is ready to function only when the ignition switch is in the ACC or ON position. Movement of the mirror is accomplished by the motor, located in the mirror housing.
REMOVAL & INSTALLATION
See Figure 1
- Remove door corner finisher panel.
- Remove mirror body attaching screws, and then remove mirror body
- Disconnect the electrical connection.
On SVX and Legacy models, it will be necessary to remove the door trim panel to gain access to the electrical connection.
- Installation is in the reverse order of removal.