Subaru Forester 1998-05

Oil Pressure Sensor

Print

Removal & Installation



  1. Remove the alternator.
  2.  
  3. Disconnect the oil pressure sensor electrical connector.
  4.  
  5. Remove the oil pressure sensor.
  6.  

To install:

  1. Apply silicone liquid gasket material to the threads of the oil pressure sensor. Tighten the oil pressure switch to 18 ft. lbs. (25 Nm).
  2.  
  3. The remainder of the installation is the reverse order of removal.

    Click image to see an enlarged view

    Fig. Location of the oil pressure sensor

  4.  

Testing



If the diaphragm is cracked or there is oil leakage within the sensor, the oil pressure sensor must be replaced.

 
label.common.footer.alt.autozoneLogo