Subaru Forester 1998-05

Testing

Print

  1. Remove the fuel pump assembly.
  2.  
  3. With the float set to the full position, using an ohmmeter, measure the resistance between the sending unit and terminal Nos. 2 and 3.
  4.  
  5. Resistance should be between 0.5-2.5 ohms. Replace the fuel level sending unit if measurement is outside of the specification.
  6.  
  7. Using an ohmmeter, measure the resistance between terminal Nos. 2 and 3 while moving the float up and down. If the resistance does not change smoothly, replace the fuel level sending unit.
  8.  

 
label.common.footer.alt.autozoneLogo