Subaru Tribeca 2006

Removal & Installation

Print

  1. Disconnect the ground cable from battery.
  2.  
  3. Remove the glove box.
  4.  
  5. Disconnect the connectors of the A/C control module, intake door actuator, blower motor, power transistor and blower resistor.
  6.  
  7. Lift the floor mat.
  8.  
  9. Loosen the bolt and nut to remove the blower motor.

    Click image to see an enlarged view

    Fig. Loosen the bolt and nut to remove the blower motor

  10.  

To install:

Reverse the removal procedures to install the blower motor.

 
label.common.footer.alt.autozoneLogo