Subaru Tribeca 2006

Throttle Body

Print

Removal & Installation



  1. Remove the collector cover.
  2.  
  3. Disconnect the ground cable from the battery.
  4.  
  5. Remove the air intake chamber.
  6.  
  7. Disconnect the connectors from the throttle position sensor.

    Click image to see an enlarged view

    Fig. Disconnect the connectors from the throttle position sensor

  8.  
  9. Disconnect the engine coolant hoses (A) from throttle body.
  10.  
  11. Remove the bolts (B) which secure throttle body to intake manifold.

    Click image to see an enlarged view

    Fig. Disconnecting engine coolant hoses from throttle body and removing bolts securing throttle body to the intake manifold

  12.  

To install:

  1. Install in the reverse order of removal. Tighten the bolts to 72 inch lbs. (8 Nm).
    NOTE
    Use new O-rings.

  2.  

 
label.common.footer.alt.autozoneLogo