Subaru Tribeca 2006

Door Glass & Regulator

Print

Power Windows



Removal & Installation
Motor & Regulator
  1. Remove the door glass.
  2.  
  3. Disconnect the motor connector.
  4.  
  5. Remove the four bolts and two nuts to remove regulator assembly.

    Click image to see an enlarged view

    Fig. Remove the regulator assembly

  6.  
  7. Remove the screws to remove motor assembly. Remove the screws to remove motor assembly.
    NOTE
    When removing the motor assembly, secure the arm correctly. Otherwise the regulator arm moves with the force of balancing spring.



    Click image to see an enlarged view

    Fig. Remove the motor assembly

  8.  

To install:

  1. To install, reverse removal procedure. Tighten the regulator assembly to 40 inch lbs. (4.9 Nm). Tighten the motor assembly to 65 inch lbs. (7.4 Nm)
  2.  

Switch

Main switch

  1. Disconnect the ground cable from battery.
  2.  
  3. Peel the cover inside the hand grip, and remove the screw.
  4.  
  5. Remove the power window switch cover assembly.
  6.  
  7. Disconnect the harness connector.
  8.  
  9. Remove the clip, and remove the power window main switch assembly.
  10.  

To install:

  1. To install reverse removal procedure.
  2.  

Sub switch

  1. Disconnect the ground cable from battery.
  2.  
  3. Peel the cover inside the hand grip, and remove the screw.
  4.  
  5. Remove the power window switch cover assembly.
  6.  
  7. Disconnect the connector.
  8.  
  9. Detach the claw and remove the power window sub switch.
  10.  

To install:

  1. To install reverse removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo