Subaru Tribeca 2006

Discharging the System

Print

  1. Perform the compressor oil return operation.

    Increase the engine to 1,500 rpm
     
    Turn on the A/C switch
     
    Turn the temperature control switch to MAX COOL
     
    Put in RECIRC position
     
    Turn the blower control switch to HI. (For models with rear coolers, also turn the rear cooler fan switch to HI)
     
    Leave in this condition for 10 minutes
     

  2.  
  3. Stop the engine.
  4.  
  5. Make sure the valves on (A)low/ (B) high pressure sides of manifold gauge set are fully (C) closed.

    Click image to see an enlarged view

    Fig. Checking valves on manifold gauge set

  6.  
  7. Install the low-/high-pressure hoses to the service ports on the (D) low/(E) high-pressure sides of the vehicle respectively.

    Click image to see an enlarged view

    Fig. Checking low/high pressure valves on manifold gauge set

  8.  
  9. Connect the center hose to the refrigerant recovery system.
  10.  
  11. Follow the operation manual to activate the refrigerant recovery system.
  12.  

 
label.common.footer.alt.autozoneLogo