Subaru Tribeca 2006

Starter

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the collector cover.
  6.  
  7. Remove the air intake chamber.
  8.  
  9. Disconnect the electrical connectors from the starter.
  10.  
  11. Remove the starter retaining bolts. Remove the starter from the vehicle.
  12.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Torque the starter retaining bolts to 37 ft. lbs.
  4.  

 
label.common.footer.alt.autozoneLogo