Subaru Tribeca 2006

Rear Window Wiper/Washer System

Print

Wiper Motor



Removal & Installation
  1. Disconnect the ground cable from battery.
  2.  
  3. Remove the rear wiper arm.
  4.  
  5. Remove the rear gate lower trim.
  6.  
  7. Disconnect the harness connector of wiper motor assembly.
  8.  
  9. Remove the bolts to remove wiper motor assembly

    Click image to see an enlarged view

    Fig. Remove the rear wiper motor assembly

  10.  

To install:

  1. Install in the reverse order of removal.
  2.  
  3. Be sure that the pivot cap with the arrow mark facing up, as shown in the figure.

    Click image to see an enlarged view

    Fig. Locating arrow mark on pivot cap

  4.  

 
label.common.footer.alt.autozoneLogo