Subaru ff-1/1300/1400/1600/1800/Brat 1970-1984 Repair Guide

Brake Light Switch

Print

If the operation of the brake light switch is not smooth and/or the stroke is not within specified value, replace the switch with a new one.

REMOVAL & INSTALLATION



  1. Disengage the electrical connector from the brake light switch.
  2.  
  3. Remove the switch from the brake pedal bracket.
  4.  

To install:

  1. Install the switch on the brake pedal bracket.
  2.  
  3. Engage the electrical connector. Then check to make sure that the stoplamps work within 0.07-0.12 in. (1.8-3.3mm) of pedal travel.
  4.  

 
label.common.footer.alt.autozoneLogo