Subaru ff-1/1300/1400/1600/1800/Brat 1970-1984 Repair Guide

Console Box and Handbrake Cover

Print

REMOVAL & INSTALLATION



  1. Apply the handbrake lever.
  2.  
  3. Lift the tray while pushing it forward.
  4.  
  5. Remove the screws which hold the handbrake cover and the console box.
  6.  



Click image to see an enlarged view

Fig. Fig. 1 Remove the screws securing the handbrake cover ...



Click image to see an enlarged view

Fig. Fig. 2 ... then remove the handbrake cover

  1. Open the handbrake cover lid. Remove the screws from the bottom of the console box and detach the handbrake cover.
  2.  
  3. Remove the shift knob on manual transaxles.
  4.  
  5. Remove the screws which hold the console box, and detach the console box.
  6.  
  7. Reverse the above procedure to install the console box and handbrake cover. Be careful not to pinch any harnesses during installation.
  8.  

 
label.common.footer.alt.autozoneLogo