Subaru ff-1/1300/1400/1600/1800/Brat 1970-1984 Repair Guide

Door Panels

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Loosen the door handle screws and remove the door handle



Click image to see an enlarged view

Fig. Fig. 2 Special tools are available to remove the window handle

  1. Remove the screws which hold the gusset cover, and detach the cover.
  2.  
  3. Remove screws which hold pull handle and other screws located further inside.
  4.  
  5. Remove the remote handle cover.
  6.  
  7. Remove the window handle by unfastening the retaining clip.
  8.  



Click image to see an enlarged view

Fig. Fig. 3 Loosen the screws retaining the door handle cover and remove the cover



Click image to see an enlarged view

Fig. Fig. 4 Use a clip puller to disengage the trim panel clips ...



Click image to see an enlarged view

Fig. Fig. 5 ... then remove the trim panel

  1. Remove the clip attached to trim panel using Clip Puller (925580000) or equivalent.
  2.  
  3. Remove the trim panel.
  4.  
  5. Installation is the reverse of removal.
  6.  

 
label.common.footer.alt.autozoneLogo