Subaru ff-1/1300/1400/1600/1800/Brat 1970-1984 Repair Guide

Headliner

Print

REMOVAL & INSTALLATION



  1. Completely open front and rear doors and lower windows all the way.
  2.  
  3. Remove the seat belt anchor bolts at the upper section of the center pillar.
  4.  
  5. Remove the rear seat cushion and backrest.
  6.  
  7. Remove the front pillar and upper trim panel.
  8.  
  9. Remove the center pillar and upper trim panel (4-door sedan).
  10.  
  11. Remove the rear pillar upper trim panel (station wagons).
  12.  
  13. Remove upper side of rear quarter window garnish.
  14.  
  15. Remove roof side rear trim rail.
  16.  
  17. Remove front roof side trim rail.
  18.  
  19. Remove various assist rails.
  20.  
  21. Remove sun visor, sun visor hook and rearview mirror.
  22.  
  23. Move front seats all the way forward and fully fold left and right backrests.
  24.  
  25. Remove interior lamp and disconnect harness.
  26.  
  27. Remove clips that hold the roof trim, being careful not to scratch the trim. It is advisable to position Clip Puller (925580000) or equivalent on roof trim's surface so that roof trim will not be scratched.
  28.  
  29. Disengage the roof trim, being careful not to break the edges during removal.
  30.  

To install:

  1. Position the roof trim in the vehicle being careful not to break the edges.
  2.  
  3. Install the clips into the roof trim.
  4.  
  5. Install the interior lamp and connect the wiring harness.
  6.  
  7. Raise the front seats and slide them as far to the rear as possible.
  8.  
  9. Install the rearview mirror, sun visor hook and the sun visor.
  10.  
  11. Install the various assist rails.
  12.  
  13. Install the front and rear roof side trim rail.
  14.  
  15. Install upper side of rear quarter window garnish.
  16.  
  17. Install the rear pillar upper trim panel (station wagons).
  18.  
  19. Install the center pillar and upper trim panel (4-door sedan).
  20.  
  21. Install the front pillar and upper trim panel.
  22.  
  23. Install the rear seat cushion and backrest.
  24.  
  25. Install the seat belt anchor bolts at the upper section of the center.
  26.  
  27. Close all doors and windows.
  28.  

 
label.common.footer.alt.autozoneLogo