Subaru ff-1/1300/1400/1600/1800/Brat 1970-1984 Repair Guide

Steering Column

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative (-) battery terminal.
  2.  
  3. Unfasten the universal joint connecting bolts and remove the universal.
  4.  
  5. Disengage the connector to the ignition switch.
  6.  
  7. Disengage the combination switch wiring harness under the instrument panel.
  8.  
  9. Remove the steering shaft installing bolts under the instrument panel.
  10.  
  11. Pull out the steering shaft assembly from the hole in the toe board.
  12.  


WARNING
Be sure to remove the steering shaft assembly installing bolts when removing the steering shaft assembly or leaving it downward for servicing of other parts.

  1. Installation is the reverse of removal.
  2.  



Click image to see an enlarged view

Fig. Fig. 1 Exploded view of a typical steering system

 
label.common.footer.alt.autozoneLogo