Subaru ff-1/1300/1400/1600/1800/Brat 1970-1984 Repair Guide

Tie Rod Ends

Print

REMOVAL & INSTALLATION



  1. Raise the front end of the car and support it with jackstands.
  2.  
  3. Remove the front wheels.
  4.  
  5. Remove the cotter pin and castle nut from the tie rod end stud. Detach the tie rod end using a suitable puller or extracting tool.
  6.  
  7. Reverse the above process to install the tie rod ends.
  8.  
  9. Torque the castle nut to 20 ft. lbs. (27 Nm).
  10.  

 
label.common.footer.alt.autozoneLogo