Subaru ff-1/1300/1400/1600/1800/Brat 1970-1984 Repair Guide

Wipers Blades and Arms

Print

REMOVAL & INSTALLATION



  1. To replace the complete wiper blade, lift up on the locking lever and slide the blade off of the wiper arm.
  2.  



Click image to see an enlarged view

Fig. Fig. 1 Press down on the spring to remove the wiper blade

  1. The wiper arms are held on by a cap nut. If the cap nut is covered by a boot, slide the boot back and away from the wiper arm base.
  2.  



Click image to see an enlarged view

Fig. Fig. 2 Pull the boot back to uncover the cap nut



Click image to see an enlarged view

Fig. Fig. 3 Loosen the cap nut while applying upward pressure

  1. Loosen the nut and apply upward pressure to remove the wiper arm.
  2.  
  3. Place the new wiper arm in position and reverse the above procedure.
  4.  

 
label.common.footer.alt.autozoneLogo