Suzuki Aerio, Verona 2002-06

Removal & Installation

Print

This vehicle utilizes a series of 4 different motors to control the dampers of the heating and cooling system.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    The negative battery cable
     
    The glove compartment
     
    The soundproofing panel
     
    Use a small screwdriver to pry up the switch by the lock. Depress the switch at the rear edge. Pull straight out
     
    The 2 bolts holding the blend door actuator
     
    The blend door actuator
     

  4.  

To install:

  1. Install or connect the following:

    The blend door actuator
     
    The 2 bolts. Tighten alternately
     
    The switch
     
    The glove compartment
     
    The soundproofing panel
     
    The negative battery cable

    Click image to see an enlarged view

    Fig. Location of blend door actuator for temperature control



    Click image to see an enlarged view

    Fig. Location of blend door actuator for defroster control



    Click image to see an enlarged view

    Fig. Location of blend door actuator for recirculation control



    Click image to see an enlarged view

    Fig. Location of blend door actuator for air distribution control

     

  2.  

 
label.common.footer.alt.autozoneLogo