Suzuki Aerio, Verona 2002-06

Hydraulic System

Print

Hydraulic System Bleeding



  1. Remove bleeder plug cap.
  2.  
  3. Connect a vinyl tube to the bleeder plug.
  4.  
  5. Depress clutch pedal several times, and then loosen the bleeder plug with the pedal depressed.
  6.  
  7. When fluid no longer comes out, tighten the bleeder plug, and then release the clutch pedal.
  8.  
  9. Repeat the previous 2 steps until all the air in the fluid is completely bled.
  10.  
  11. Tighten the bleeder plug.
  12.  
  13. Install the bleeder plug cap.
  14.  
  15. Check that all of the air has been bled from the clutch line.
  16.  
  17. Check the fluid level and add as necessary.
  18.  

 
label.common.footer.alt.autozoneLogo