Suzuki Aerio, Verona 2002-06

Stabilizer Bar (Sway Bar) & Links

Print

Removal & Installation



  1. Remove stabilizer joints. When loosening joint nut, hold stud with wrench.

    Click image to see an enlarged view

    Fig. Remove the stabilizer joints

  2.  
  3. Remove the stabilizer mount brackets.
  4.  
  5. Remove the stabilizer bar.
  6.  

To install:

  1. Loosely assemble all components in reverse order of removal.
  2.  
  3. With painted mark (1) on stabilizer bar and end face of mount bushing (2) aligned, tighten mount bracket bolts to 17 ft. lbs. (23 Nm).
    NOTE
    If painted mark has gone, align the vehicle center and the center of stabilizer bar.

  4.  
  5. Tighten joint nuts to 36.5 ft. lbs. (50 Nm). When tightening, hold stud with wrench.

    Click image to see an enlarged view

    Fig. Installing stabilizer bar

  6.  

 
label.common.footer.alt.autozoneLogo