Suzuki Aerio, Verona 2002-06
Brake Disc (Rotor)
Removal & Installation
Before servicing the vehicle, refer to the Precautions Section.
Remove or disconnect the following:
Wheel and tire
Remove the brake caliper mounting bolts
Remove brake caliper as an assembly and position to the side with a wire
Remove the rotor from its mounting.
Install the following:
Brake caliper as an assembly. Tighten the M14 bolts to 78 ft. lbs. (105 Nm), then angle-tighten 60°
Install wheel. Tighten lug nuts to 102 ft. lbs. (138 Nm)