Suzuki Esteem, Swift 1994-02

Removal & Installation

Print



Click image to see an enlarged view

Fig. Heater control unit

  1. Disconnect the negative battery cable.
  2.  
  3. If necessary, pull the control knobs from the levers.
  4.  
  5. Release the latches at the rear of the bezel.
  6.  
  7. Disconnect the control cables at the blower and heater assembly.
  8.  
  9. Remove the control assembly fasteners.
  10.  
  11. Pull the control assembly out and disconnect the electrical connections.
  12.  
  13. Disconnect the control cables from the levers.
  14.  
  15. Remove the control panel.
  16.  

To install:

  1. Install the control panel.
  2.  
  3. Connect the control cables to the levers.
  4.  
  5. Connect the electrical connections and install the control assembly.
  6.  
  7. Install the control assembly fasteners.
  8.  
  9. Connect the control cables at the blower and heater assembly.
  10.  
  11. Engage the latches at the rear of the bezel.
  12.  
  13. If necessary, install the control knobs.
  14.  
  15. Adjust the control cables.
  16.  
  17. Connect the negative battery cable.
  18.  

 
label.common.footer.alt.autozoneLogo