Suzuki Esteem, Swift 1994-02

Flywheel

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the engine or transaxle assembly.
  6.  
  7. Using a special holding tool, hold the crankshaft.
  8.  
  9. Remove the 6 mounting bolts and remove the drive plate (A/T) or flywheel (M/T).
  10.  

To install:

  1. Using a special holding tool, hold the crankshaft.
  2.  
  3. Clean the bolts and bolt holes.
  4.  
  5. Install the drive plate (A/T) or flywheel (M/T).
  6.  
  7. Install and uniformly tighten the 6 bolts in several passes, to the following torque values:
    NOTE
    Do not start the engine within an hour after installing.



    1.3L engine-41-47 ft. lbs. (56-64 Nm)
     
    1.6L engine-57 ft. lbs. (78 Nm)
     
    1.8L engine-51 ft. lbs. (70 Nm)
     

  8.  
  9. Install the engine or transaxle assembly.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo