Suzuki Esteem, Swift 1994-02

Removal & Installation

Print


CAUTION
The fuel system pressure must be relieved before disconnecting any fuel lines. Failure to do so may result in personal injury.

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Properly relieve the fuel system pressure.
  4.  
  5. Place a container under the fuel filter.
  6.  
  7. Remove or disconnect the following:
    CAUTION
    A small amount of fuel may be released after the fuel hose is disconnected. Cover the hose and pipe with a shop towel.



    Fuel inlet hose from the fuel filter
     



    Outlet hose from the fuel feed pipe
     
    2 fuel filter mounting bracket bolts and remove the fuel filter from the frame with the outlet hose attached
     
    Fuel filter from the bracket by unfastening the mounting bolt
     
    Outlet hose from the fuel filter
     

  8.  

To install:

  1. Install or connect the following:

    Fuel filter on the bracket
     
    Mounting bolt
     
    Remaining components in the reverse order of removal
     
    Inlet and outlet hoses to the filter
     
    Negative battery cable
     

  2.  
  3. With the ignition ON and the engine OFF check for leaks.
  4.  


CAUTION
The fuel system pressure must be relieved before disconnecting any fuel lines. Failure to do so may result in personal injury.

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Properly relieve the fuel system pressure.
  4.  
  5. Place a container under the fuel filter.
  6.  
  7. Remove or disconnect the following:
    CAUTION
    A small amount of fuel may be released after the fuel hose is disconnected. Cover the hose and pipe with a shop towel.



    Fuel inlet hose from the fuel filter
     



    Outlet hose from the fuel feed pipe
     
    2 fuel filter mounting bracket bolts and remove the fuel filter from the frame with the outlet hose attached
     
    Fuel filter from the bracket by unfastening the mounting bolt
     
    Outlet hose from the fuel filter
     

  8.  

To install:

  1. Install or connect the following:

    Fuel filter on the bracket
     
    Mounting bolt
     
    Remaining components in the reverse order of removal
     
    Inlet and outlet hoses to the filter
     
    Negative battery cable
     

  2.  
  3. With the ignition ON and the engine OFF check for leaks.
  4.  

 
label.common.footer.alt.autozoneLogo