Suzuki Forenza, Reno 2003-06

Removal & Installation

Print


WARNING
Relieve the coolant system pressure.

  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the engine coolant temperature sensor connector.
  4.  
  5. Remove the sensor from the Electronic Ignition (EI) system ignition coil adapter.
  6.  

To install:

  1. Coat the threads of the engine coolant temperature sensor with sealer.
  2.  
  3. Install the sensor into the(EI) system ignition coil adapter.
  4.  
  5. Tighten the engine coolant temperature sensor to 15 ft. lbs.
  6.  
  7. Connect the engine coolant temperature sensor connector.
  8.  
  9. Fill the coolant system.
  10.  
  11. Connect the negative battery cable.

    Click image to see an enlarged view

    Fig. Engine coolant temperature sensor location

  12.  

 
label.common.footer.alt.autozoneLogo