Suzuki Forenza, Reno 2003-06

Oil Pressure Sensor

Print

Removal & Installation



  1. Remove the right front wheel well oil pan scraper.
  2.  
  3. Disconnect the oil pressure switch connector.
  4.  
  5. Unscrew oil pressure switch.
  6.  

To install:

  1. Install the oil pressure switch.
  2.  
  3. Tighten the oil pressure switch to 30 ft lbs. (40 Nm).
  4.  
  5. Connect the electrical connector to the oil pressure switch.
  6.  
  7. Install the right front wheel well oil pan scraper.
  8.  
  9. Check the oil level. Add oil until it reaches the full mark.
  10.  

Testing



  1. Inspect oil pressure switch for signs of oil leakage, check connector and terminals for poor connections.
  2.  

 
label.common.footer.alt.autozoneLogo