Suzuki Forenza, Reno 2003-06

Rear Main Seal

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Engine assembly
     
    Flexplate/flywheel from the crankshaft
     

  4.  
  5. Carefully pry the oil seal out of the retainer without scratching the sealing surface of the crankshaft.
  6.  

To install:

  1. Apply engine oil to the lip of the new seal.
  2.  
  3. Install or connect the following:

    Seal in the retainer using a suitable seal driver
     
    Flexplate/flywheel
     
    Engine assembly
     

  4.  

 
label.common.footer.alt.autozoneLogo