Suzuki Forenza, Reno 2003-06

Exterior Lights

Print

Brake, Signal & Marker Lights



Removal & Installation
Front Side Marker Lights
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the headlamp.
  4.  
  5. Disconnect the electrical connector.
  6.  
  7. Remove the side marker lamp.

    Click image to see an enlarged view

    Fig. Marker lamp removal

  8.  

To install:

  1. Connect the electrical connector.
  2.  
  3. Install the side marker lamp.
  4.  
  5. Install the headlamp.
  6.  
  7. Connect the negative battery cable.
  8.  

High-Mount Brake Light
Hatchback
  1. Disconnect the negative battery cable.
  2.  
  3. Pry off the hatchback door upper garnish molding.
  4.  
  5. Remove the bolts and the stoplamp

    Click image to see an enlarged view

    Fig. Stoplamp

  6.  

To install:

  1. Install the stoplamp with the bolts.
  2.  
  3. Tighten the stoplamp mounting bolts to 35 inch. lbs. (4 Nm)
  4.  
  5. Connect the negative battery cable.
  6.  

Wagon
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the tailgate trim cover screws.
  4.  
  5. Remove the tailgate trim cover.
  6.  
  7. Remove the tailgate garnish molding.
  8.  
  9. Disconnect the electrical connector.
  10.  
  11. Remove the rear wiper motor.
  12.  
  13. Remove the license plate lamps bracket bolts and the nuts.
  14.  
  15. Remove the license plate lamps bracket.
  16.  
  17. Remove the station wagon door latch rod.

    Click image to see an enlarged view

    Fig.

  18.  
  19. Remove the center high mounted stoplamp nuts.
  20.  
  21. Remove the center high mounted stoplamp.
  22.  

To install:

  1. Install the center high mounted stoplamp.
  2.  
  3. Install the center high mounted stoplamp nuts.
  4.  
  5. Tighten the center high mounted stoplamp nuts to 35 inch. lbs. (4 Nm)
  6.  
  7. Install the license plate lamps bracket.
  8.  
  9. Install the license plate lamps bracket bolts and nuts.
  10.  
  11. Install the station wagon door latch rod.
  12.  
  13. Install the rear wiper motor.
  14.  
  15. Connect the electrical connector.
  16.  
  17. Install the tail gate trim cover.
  18.  
  19. Install the tail gate trim cover screws.
  20.  
  21. Connect the negative battery cable.
  22.  

Daytime Running Lamp Module



Removal & Installation
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument panel under cover and the knee bolster.
  4.  
  5. Remove the bolts and the daytime running lamp module.
  6.  
  7. Disconnect the electrical connector.

    Click image to see an enlarged view

    Fig. Lamp module removal

  8.  

To install:

  1. Connect the electrical connector.
  2.  
  3. Install the daytime running lamp module with the bolts.
  4.  
  5. Tighten the daytime running lamp module bolts to 18 inch lbs. (2 Nm)
  6.  
  7. Install the instrument panel under cover and the knee bolster.
  8.  
  9. Connect the negative battery cable.
  10.  

Fog/Driving Lights



Removal & Installation
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the bolts and the front fog lamp.
  4.  
  5. Disconnect the electrical connector.

    Click image to see an enlarged view

    Fig. Fog lamp and mounting bolts

  6.  
  7. Remove the fog lamp access cover.
  8.  
  9. Remove the retaining wire.
  10.  
  11. Remove the bulb.

    Click image to see an enlarged view

    Fig. Fog lamp bulb removal

  12.  

To install:

  1. Install the bulb.
  2.  
  3. Install the retaining wire.
  4.  
  5. Install the fog lamp access cover.
  6.  
  7. Connect the electrical connector.
  8.  
  9. Install the front fog lamp with the bolts.
  10.  
  11. Tighten the front fog lamp bolts to 35 inch lbs. (4 Nm)
  12.  
  13. Connect the negative battery cable.
  14.  

Headlights



Removal & Installation
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the headlamp mounting bolts and nut.

    Click image to see an enlarged view

    Fig. Headlamp assembly

  4.  
  5. Disconnect the electrical connectors.
  6.  
  7. Remove the turn signal bulb.
  8.  
  9. Remove the headlamp assembly.
  10.  
  11. Remove the cap concealing the headlamp bulb.
  12.  
  13. Disconnect the headlamp bulb electrical connector.
  14.  
  15. Remove the headlamp bulb.

    Click image to see an enlarged view

    Fig. Rear view of headlamp assembly

  16.  

To install:

  1. Install the headlamp bulb.
  2.  
  3. Connect the headlamp bulb electrical connector.
  4.  
  5. Install the cap concealing the headlamp bulb.
  6.  
  7. Install the turn signal bulb.
  8.  
  9. Connect the electrical connectors.
  10.  
  11. Install the headlamp assembly with the bolts and nut.
  12.  
  13. Tighten the headlamp assembly bolts and nut to 35 inch lbs. (4 Nm)
  14.  
  15. Connect the negative battery cable.
  16.  

 
label.common.footer.alt.autozoneLogo