Suzuki Forenza, Reno 2003-06

Stabilizer Bar (Sway Bar)

Print

Stabilizer Shaft



Removal & Installation
  1. Raise and suitably support the vehicle.
  2.  
  3. Remove the stabilizer shaft clamp bolts.
  4.  
  5. Remove the stabilizer shaft-to-stabilizer link nut.
  6.  
  7. Remove the stabilizer shaft clamps, the insulators, and the stabilizer shaft from the vehicle.

    Click image to see an enlarged view

    Fig. Stabilizer shaft clamp and bolt removal

  8.  

To install:

  1. Install the stabilizer shaft, the insulators, and the stabilizer shaft clamps.
  2.  
  3. Install the stabilizer shaft-to-stabilizer link nut.
  4.  
  5. Tighten the stabilizer shaft-to-stabilizer link nut to 35 ft lbs. (47 Nm)
  6.  
  7. Install the stabilizer shaft clamp bolts.
  8.  
  9. Tighten the stabilizer shaft clamp bolts to 30 ft. lbs. (40 Nm)
  10.  
  11. Lower the vehicle.
  12.  

 
label.common.footer.alt.autozoneLogo