Suzuki Samurai/Sidekick/Tracker 1986-1998 Repair Guide

ABS Enable/ABS Check Relays

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the electronic brake control relay cover.
  4.  
  5. Detach the electronic brake control relay from the connector.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: The two ABS relays are mounted next to the hydraulic modulator assembly, in the engine compartment

To install:
  1. Attach the electronic brake control relay to the connector.
  2.  
  3. Install the relay cover.
  4.  
  5. Connect the negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo