Suzuki Vitara, Grand Vitara, XL7 2000-06

Removal & Installation

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Remove glove box.
  4.  
  5. Remove temperature control actuator connector (Blend door).
  6.  
  7. Remove temperature control actuator from heater unit.

    Click image to see an enlarged view

    Fig. Temperature control actuator ( Blend door) 2003-05

  8.  
  9. Install in reverse order of removal procedure.
  10.  
  11. Connect the negative battery cable.
  12.  

  1. Disconnect the negative battery cable.
  2.  
  3. Remove steering column hole cover from instrument panel.
  4.  
  5. Disconnect temperature control actuator connector.
  6.  
  7. Remove screws and then, remove temperature control actuator from HVAC unit.

    Click image to see an enlarged view

    Fig. Temperature control actuator-2006

  8.  
  9. Reverse removal procedure.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo