Log In
Search suggestions

    My Vehicles

    1996 Mazda Truck MPV 4WD 3.0L MFI 6cyl

    My Store

    1720 S RIDGEWOOD A
    (386) 427-1210

    CLOSED Open at 7:30 AM

    SAVE 20% + GET A $20 GIFT CARD ON ONLINE SHIP-TO-HOME ORDERS OVER $100.

    Use Code: BLKFRIDAY

    See Details

    Suzuki Vitara, Grand Vitara, XL7 2000-06

    Removal & Installation

    Print

    1.6L, 2.0L & 2.5L Engines



    1. Disconnect negative cable from battery.
    2.  
    3. Drain cooling system.
    4.  
    5. Disconnect coupler from ECT sensor.
    6.  
    7. Remove ECT sensor from intake manifold on 1.6L or water outlet cap on 2.0L and 2.5L engines.
    8.  

    To install:

    1. Reverse removal procedure noting the following.
      1. Clean mating surfaces of sensor and intake manifold.
      2.  
      3. Check O-ring for damage and replace if necessary.
      4.  
      5. Tighten ECT sensor to 11 ft. lbs. (15 Nm).
      6.  

    2.  
    3. Connect the negative battery cable.
    4.  

    2.7L Engine



    1. Disconnect the negative battery cable.
    2.  
    3. Drain cooling system.
    4.  
    5. Disconnect coupler from ECT sensor.
    6.  
    7. Remove ECT sensor from water outlet cap.

      Click image to see an enlarged view

      Fig. ECT sensor location 2.7L shown

    8.  

    To install:

    1. Reverse removal procedure noting the following.
      1. Clean mating surfaces of sensor and water outlet cap.
      2.  
      3. Use new O-ring.
      4.  
      5. Tighten ECT sensor to 8.5 ft. lbs.(12 Nm).
      6.  

    2.  
    3. Connect the negative battery cable.
    4.  

     
    AutoZone Logo