Suzuki Vitara, Grand Vitara, XL7 2000-06

Manual Locking Hubs

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Set the selector knob to the FREE position.
  4.  
  5. Remove or disconnect the following:

    Hub cover assembly
     
    Hub body assembly
     

  6.  

To install:

  1. Install the hub body. Tighten the bolts to 18 ft. lbs. (25 Nm).
  2.  
  3. Align the hub cover stopper nail with the groove in the hub body and install the hub cover. Tighten the bolts to 90 inch lbs. (10 Nm).
  4.  
  5. Check for proper hub operation.

    Click image to see an enlarged view

    Fig. Manual hub alignment-All models

  6.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Set the selector knob to the FREE position.
  4.  
  5. Remove or disconnect the following:

    Hub cover assembly
     
    Hub body assembly
     

  6.  

To install:

  1. Install the hub body. Tighten the bolts to 18 ft. lbs. (25 Nm).
  2.  
  3. Align the hub cover stopper nail with the groove in the hub body and install the hub cover. Tighten the bolts to 90 inch lbs. (10 Nm).
  4.  
  5. Check for proper hub operation.

    Click image to see an enlarged view

    Fig. Manual hub alignment-All models

  6.  

 
AutoZone Logo